Why Your Gas Meter Box Needs Ventilation

Why Your Gas Meter Box Needs Ventilation

Why Your Gas Meter Box Needs Ventilation

A gas meter box is more than a simple weatherproof cover. In addition to keeping rain off the meter, it must also be safe. This is all dependent on it allowing sufficient airflow. There is more on Gas Meter box at Gas meter boxes through meter box.

Why Ventilation Matters

Gas is heavier than air. If there is a leak from a meter or from pipework at the rear of a meter then in a sealed box the gas will collect around the meter connections rather than dissipating out to ground. Good ventilation will allow any leaking gas to escape to outdoors. This is the purpose of the vents fitted to most meter boxes, not to seal a lid to a box.

The Ventilation Requirement

Ventilation is designed into the design of proper meter boxes. Vents are positioned to allow airflow through the box, not just at the ends of the box. A meter box which appears robust but does not contain proper ventilation is not a safe gas meter box.

Common Vent Types

Most meter boxes have been supplied with louvred vent panels in the front door or sides of the box, slotted grilles or even vented bricks at the top and bottom of the casing. In order to create a through-flow of air the vents must be positioned at top and bottom of the box, not just at the front. When purchasing a replacement meter box it is worth checking to see how the ventilation has been designed into the product.

Signs Ventilation Is Inadequate

Rust, musty smells, dampness and even old gas leaks can leave residues behind which can foul up the ventilation of a gas meter box, or make it appear to be inadequately ventilated. While it is unlikely that simply opening up a meter box will release a deadly gas, there is no reason to delay in sorting out any apparent problem with ventilation.

How Box Choice Affects Airflow

A grey gas meter box fixed to a brick wall, with ventilation slots in its side panel

You should check that ventilation has not been impeded by the way that the box has been installed against a wall or fence. Leave sufficient space between the box and any adjacent wall or fence to allow air to enter into the box. Also make sure that any decorative covers for meter boxes (which may be supplied as part of a decorative cover or as a replacement part) have not been painted over solid vent panels. The vents must remain open to form an effective part of the box’s ventilation.

Simple Checks To Keep Vents Working

Leaves, cobwebs, ivy etc need to be cleared from the ventilation louvres on an occasional basis. During very cold weather the ventilation slots need to be cleared of ice in order to allow airflow. Also check that your gas meter box has not been knocked and has not been suddenly pushed back against a wall, fence panel or section of new landscaping. New meter boxes come in a number of different models, each with ventilation designed in. Thus a simple damaged or poorly-ventilated box can be easily replaced by a new, properly-ventilated one.

Who’s Responsible For It

The box itself and its ventilation is the property of the homeowner or landlord and it is their responsibility to ensure it is kept in good condition. However, the gas meter itself is part of the gas supply and belongs to the gas supplier. This supplier is also responsible for the condition of the meter and for any faults that may occur.

What To Do If Ventilation Looks Compromised

However if you suspect a leak you should not investigate further or attempt to fix the problem yourself. You should turn off any gas using appliances, refrain from using open flames and contact a registered engineer to check your gas installations for you. This can be a very simple phone call and far better than risking anything!

Ventilation is an easily overlooked issue until it becomes a problem. Checking your meter box vents every now and then will only take around 5 minutes to ensure they are functioning properly.

Post Comment