How to clean burnt pots

To make your favorite recipes and get the best flavor, the state of kitchen utensils, such as pots, plays an important role. In the case of pots, keeping them in good condition allows them to fulfill their function perfectly and not affect the preparation in terms of the final result. Therefore, it is essential to clean them if they burn due to carelessness or any other reason.

Burnt pots are a problem with an easy solution, especially if you act promptly. It is not necessary to throw them away just for small burns and even more so if they have been used for a short time. By cleaning them properly and thus removing all the burned parts, you can continue using them as always. To discover how to clean burnt pots with the most effective tricks and products, We recommend that you continue reading this practical article.

How to clean burnt pots with vinegar and baking soda

Vinegar is an excellent cleaning product due to its acidity which, mixed with baking soda, becomes even more effective. Thus, you can clean your burnt pots with this combination in a simple way. Learn how to clean burnt pots with vinegar and baking soda by following these simple steps:

• Fill the burnt pot with water, covering the entire bottom.
• Add vinegar and turn on the heat so that it begins to boil.
• When the water and vinegar boil, remove the pot from the heat.
• Also, to clean pots that are burnt on the inside when there are a lot of burnt and sticky parts, you need to add baking soda.

You will see that there is a reaction and that bubbles come out. It is normal and you can now wash the container by rubbing the interior with this mixture of water, vinegar, and bicarbonate and a sponge or sponge. Use a scouring pad if the pot does not have a non-stick coating, but if it does, then use a soft sponge to avoid damaging it.

In case some stains remain, apply a paste made with baking soda and a few drops of vinegar diluted in water, that is, prepare the same mixture as before but much thicker (more baking soda than liquids). Let it act for a few seconds and then use the scourer, brush, or sponge to rub the paste over the burned area and remove all remains after rinsing the pot with clean water.

We recommend you read these other posts on How to clean with baking soda and vinegar and How to clean with white vinegar to learn more tips and tricks for using these homemade cleaning products.

How to clean burnt pots with baking soda

If you’re wondering how to remove burnt from a stainless steel pot, note that baking soda is also useful on this material. You should mix in the container a tablespoon of bicarbonate for every 1.5 liters of water. Learn how to clean a pot with baking soda with these instructions:

• Light a fire and put the pot with water on it.
• When the water boils, add the bicarbonate of soda, stirring until it dissolves.
• After a few more minutes of boiling, remove the pot from the heat.
• Using a spatula (preferably wooden), scrape off any burnt parts from the inside of the pot.
• Once you manage to detach the black from the container, empty it and let it cool.
• Finally, wash the pot as you usually do.

If there are lingering black spots, use a baking soda paste to scrub directly. You can make this paste with baking soda and a little water or, if you see that it is very stuck and difficult to remove, we recommend you try the mixture that includes vinegar as we have explained before.

With this method, you will know how to remove the black from burned pots to leave them completely clean before using them again, but this product is also useful for cleaning more objects and some areas of the house. Here you can learn about How to clean with baking soda.

How to clean a burnt pot with cola

Cola is a home remedy with which you can easily clean pots that are burned on the outside and inside thanks to its composition with acids and gas. We help you learn how to clean a burnt pot with cola by following these steps:

• Open and pour a bottle of cola into the container.
• Light a fire to bring the soda to a boil.
• Remove the pot when the soda has started to boil.
• Scratch the surface with a scouring pad. Thanks to the acidity of the cola, the black spots will disappear quickly.
• To clean the pot that has been burned on the outside, you can fill a basin or sink with this soda and use it to soak the pot for about 20 minutes and then clean it using a soft scouring pad or sponge.

How to use lemon to clean burnt pots

Cleaning a burnt pot with lemon is also possible thanks to its citric acid. You just have to follow these simple steps to achieve it:

• Cut a lemon in half.
• Rub the lemon over the black spots in the pot.
• With the help of a scourer, finish rubbing the lemon juice until the pot is clean and shines again because little by little you will see that the burnt parts are leaving the metal surface.
• As you see that it is getting clean of burned parts, do not forget to wash the pot as you usually do with dish soap or in the dishwasher, so you will remove all traces of dirt and you can use it again without problems.

How to use salt to clean burnt pots

You can also clean a burnt pot with salt. It is a resource as simple as it is cheap since salt is in every kitchen and you can use it at any time. Use salt correctly to exfoliate and clean a burnt pot by following these tips:

• We recommend that you remove as much dirt as possible from the inside of the pot, that is, do a basic initial cleaning with water and a scourer, so that the product you use later, such as salt, will act more easily.
• Pour some warm water into the pot and add 2 tablespoons of salt.
• Rub the pot with a soft sponge, insisting on the burned areas.
• If you can’t remove all the burns, boil water with more salt in the pot.
• Once it has cooled, rub it again with the sponge and you will get rid of the stains.