How to remove stains from your bathtub

How to remove stains from your bathtub

Spread the love

Nobody likes the idea of bathing in a dirty bathtub. Being continuously exposed to moisture, bacteria and mold can accumulate in the bathtub, creating a disaster that is both unsightly and unhygienic. The best way to prevent dirt and grime from getting out of control is to continuously clean your bathtub, but sometimes you should take more relevant measures to get rid of difficult spots. In this article, we give 15 tricks to remove stains from your bathtub.

15 Tricks to remove stains from your bathtub

  1. Avoid using abrasive chemical cleaners
  2. Sprinkle the stains with vinegar
  3. Let the vinegar sit for 10 to 20 minutes
  4. Use a soft sponge to clean the stains
  5. Rinse the inside of the tub
  6. First, apply vinegar
  7. Use a commercial spray cleaner that does not contain bleach
  8. Prepare your own natural cleaner
  9. Let the solution settle for several minutes in the problem areas
  10. Rub the spots gently
  11. Get a can of abrasive cleaning powder
  12. Opt for natural alternatives
  13. Spray cleaning dust all over the stained bathtub
  14. Add enough water to make a paste
  15. Clean stains with a sturdy scouring pad

Remove stains from an acrylic bathtub

How to remove stains from your bathtub- 1: Avoid using abrasive chemical cleaners

If you are cleaning an acrylic bathtub, avoid using strong astringent powders, as well as powerful chemicals such as bleach. Acrylic is a soft material and, therefore, is easily damaged, so the use of these products will almost certainly ruin the finish of your bathtub.

In general, it is advisable to start with the softest cleaning solution you have and gradually try some more powerful ones in case the first one does not work.

How to remove stains from your bathtub- 2: Sprinkle the stains with vinegar

White distilled vinegar is an excellent natural cleaning solution, especially on smooth surfaces such as acrylic that release stains easily. Pour vinegar into a spray bottle and have it with you when you do the routine cleaning of the bathroom. Apply the vinegar liberally so that it completely covers the affected area.

If you have some lemons in the refrigerator, you can use them, because lemon juice is a recommended alternative for vinegar. Sprinkle the stains with vinegar

How to remove stains from your bathtub- 3: Let the vinegar sit for 10 to 20 minutes

While settling, the acidity of the vinegar will break down mold, dirt, and discoloration, so you can clean them without problems. You might even see that the spots begin to dissolve and disappear on their own before you even begin to rub.

Make sure you wait a long time for the vinegar to begin to take effect.

If there are particularly problematic spots, sprinkle some baking soda while the vinegar settles.

How to remove stains from your bathtub- 4: Use a soft sponge to clean the stains

The yellow side of a typical crockery sponge will suffice. After having let the vinegar settle down, you will not have much difficulty in removing dirt and dirt. Rub the sponge quickly from one side to the other until the spots disappear.

You can also use specific cleaning items for this task, such as sponges made of porous melamine foam, in order to remove stains more easily.Use a soft sponge to clean the stains

How to remove stains from your bathtub- 5: Rinse the inside of the tub

Leave the tap open for a few minutes to remove any trace of the vinegar solution, as well as dirt or loose dirt. If you use an adjustable shower head to clean the bathtub, turn it on and pass it directly over the areas you have just cleaned. Once you have cleaned it, let the bathtub dry to prevent the bacteria from causing the stains from returning.

Most stains in the bathtub occur because of the germs that create a milky residue as they accumulate.

Leave the shower curtain open and turn on the fan so that the bath receives a continuous flow of air.

Remove stains in a bathtub with enamel coating

How to remove stains from your bathtub- 6: First apply vinegar

While it is a mild natural cleanser, vinegar is usually powerful enough to kill most stains if applied liberally and waiting for the time it takes for it to act. Spray the tub completely with vinegar, let it settle for a few minutes and then rub the stains with a sponge or a stiff bristle brush. If you notice that the vinegar does not achieve the desired effect, use other more intense methods.

There will come a point where adding more and more vinegar will not be enough to remove the stain.First apply vinegar

How to remove stains from your bathtub- 7: Use a commercial spray cleaner that does not contain bleach

These products are recommended to remove stubborn stains without damaging delicate surfaces. Because most of these products contain a similar combination of ingredients, they will all work just as well. Just make sure that the one you choose does not contain bleach, as this component can considerably weaken the outer layer of enamel in the bathtub.

Only buy cleaners that are specifically approved for enamel surfaces. Check the label meticulously before buying a specific product in order to make sure you get what you need.

How to remove stains from your bathtub- 8: Prepare your own natural cleaner

If you do not like much shopping, you can prepare a simple multipurpose cleaner by mixing warm water, baking soda, Castile soap and essential oils in a spray bottle. All these ingredients are easy to get and are safe, but they have enough potency when combined. After preparing the mixture, spray it on the stained surfaces, wait a few minutes until it takes effect and then clean.

If you cannot get soap from Castile, you can use hydrogen peroxide.

Essential oils such as tea tree and peppermint can also act as natural disinfectants.Prepare your own natural cleaner

How to remove stains from your bathtub- 9: Let the solution settle for several minutes in the problem areas

Spray the solution and wait for it to settle, particularly in places with difficult spots to remove and discoloration. The cleaning solution should begin to take effect on the spots immediately.

The longer you let the solution settle, the more effective it will be in removing persistent waste.

When using chemical cleaners, wear gloves and ventilate the place well.

How to remove stains from your bathtub- 10: Rub the spots gently

Use a soft sponge or microfiber towel to avoid marks or scratches. Make circular motions on the stains and, when finished, rinse the remaining dirt with the cleaner, and then let the tub dry completely.

If necessary, apply the cleaning solution again. Then clean and repeat the procedure until the stains leave the enamel surface.

If you use a more abrasive object than a sponge to rub the enamel, you could wear the finish.Rub the spots gently

Remove stains in a porcelain bathtub

How to remove stains from your bathtub- 11: Get a can of abrasive cleaning powder

In the case of porcelain surfaces with a large accumulation of dirt, you should use something a little more powerful, such as cleaning powders. Small particles can penetrate deeper into the stains on the surface of the bathtub and remove them.

Powdered cleaners contain chemicals known as surfactants, which have mild abrasive properties. This makes them much more effective for the removal of hardened and adhering residues.

Apply the abrasive cleaners moderately. In most cases, a single can will be enough to make a complete cleaning.

How to remove stains from your bathtub- 12: Opt for natural alternatives

Difficult stains such as rust stains and hard water debris can also be cleaned with a mixture of hydrogen peroxide and cream of tartar. Mix the two ingredients until they have the same consistency as the cake glaze and spread them directly over the spots. After 10 minutes, clean the spots with a nylon brush or pumice until they disappear completely.

Homemade products like this blend are ideal for those who care about their health and the environmental effects of chemical cleaning products.

Hydrogen peroxide will also help to treat discoloration over time and will lighten the finish of the bathtub.

How to remove stains from your bathtub- 13: Spray cleaning dust all over the stained bathtub

A moderate cleaning should be enough to get rid of most stains. The powder will not adhere to the porcelain surface, but when combined with a liquid, a paste will be created that you can spray directly on the stains.

Make sure you cover the bottom of the bathtub, where accumulated mold can be dangerously slippery.Spray cleaning dust all over the stained bathtub.

How to remove stains from your bathtub- 14: Add enough water to make a paste

Spray purified or taps water on the cleaning powder. In this way, the powder will adopt a thick and frothy consistency, forming a paste that you should rub on the spots and then let it sit for an hour to take effect.

You can also moisten a clean sponge or cloth and use them to rub the cleaner until it thickens.

Avoid adding too much water. If the cleaner is too diluted, it will lose its effectiveness.

How to remove stains from your bathtub- 15: Clean stains with a sturdy scouring pad

Since porcelain has a hard and durable finish, you can rub it safely with an abrasive implement without having to worry about causing any scratches. To achieve the best results, use a pumice stone or a hard bristle brush. Rub the spots until they disappear completely, then rinse the bathtub with clean water and finally let it dry before using it again.

If you do not have a specific brush for this cleaning, you can use the green side of a kitchen sponge.

Never use a steel wool or similar object to rub the porcelain tub, because even when this material is resistant, it can cause permanent damage to the finish.Clean stains with a sturdy scouring pad

Additional tips:

  • Focus on cleaning the bathtub regularly (ideally every two weeks) so you do not need to do a deep cleaning in the future.
  • Always choose cleaning products that are safe for any type of material that the bathtub is made of.
  • Conventional shampoos can also be used to treat light spots, as they are designed to remove dirt and oil.
  • Leave the bathroom door open while doing the cleaning to allow fresh air circulation.
  • Always have on hand a supply of cleaning materials either in the bathroom or in a nearby room.
  • Purchase a long-handled cleaning brush in order to avoid the strain of bending or kneeling while cleaning.

We hope you will like these tricks to remove stains from your bathtub. We want your comments and suggestions to promote our ideas. Thank you and have a great day!

Leave a Reply

Your email address will not be published. Required fields are marked *